Technical information
Table Of Contents
- PART1.pdf
- PART2.pdf
- OPERATION OF THE EQ 55
- BASIC OPERATION OF THE EQ 55
- MENU SELECTIONS
- DISPLAY MODE MENU
- EXPANSION MENU
- GAIN MENU
- TRANSMIT POWER MENU
- CONFIGURATION MENU
- Configuration- Units of Measure
- Configuration - Background Color
- Configuration - Language
- Configuration - EXT I/F (External Interface) Sub-menu
- Configuration - EXT I/F - NMEA 0183
- Configuration - EXT I/F - Printer
- Configuration - EXT I/F - Ship's Speed
- Configuration - EXT I/F - Water Temperature
- Configuration - EXT I/F - Trigger
- Configuration - Test Pattern
- Configuration - TVG (Time Varying Gain)
- Configuration - Color Threshold
- Configuration - Scroll Speed
- Configuration - Alarms Sub-menu
- Configuration - Alarms - Set Min Depth (Set Minimum Depth)
- Configuration - Alarms - Set Max Depth (Set Maximum Depth)
- Configuration - Alarms - Min and Max Alarms ON/OFF
- Configuration - White Line
- Configuration - Filter
- Configuraiton - STC (Sensitivity Time Control)
- Configuration - Depth Adjust (Depth Adjustment)
- Configuration - Sound Velocity
- Configuration - Save Settings
- Configuration - Load Settings
- OPERATION OF THE EQ 55
- PART3.pdf
- PART4.pdf
- INSTALLATION INSTRUCTIONS FOR THE EQ 55.
- BASIC INFORMATION
- TRANSDUCERS AND SPEED/TEMPERATURE SENSORS
- DETERMINING THE POSITION FOR THE TRANSDUCER
- General
- Go Deep
- The Boundary Water Layer
- Propeller Noise
- Vessel Heave
- Noise From Protruding Objects on the Hull
- Summing up on Transducer Location
- Thru-hull Installation
- EQ 55 Standard Transducer Mounted to Wood or Fiberglass Hull
- EQ 55 Standard Transducer Mounted to Wood or Fiberglass Hull.
- Adapter plate for EQ 55 Standard Transducer Mounted to a Steel Hull.
- EQ 55 Standard Transducer Mounted to a Steel Hull.
- EQ 55 Standard Transducer Mounted to a Steel Hull.
- Steel Stuffing Tube for EQ 55 Standard Transducer.
- DISPLAY UNIT INSTALLATION
- ELECTRICAL CONNECTIONS
- Power Supply Connections
- Fuse
- Cabinet Grounding
- Rear Panel Receptacles
- Speed and Temperature Sensor Connections
- NMEA 0183 Interface Connections
- Color Printer Connection
- Location of Fuse and Rear Panel Receptacles
- Transducer Connectors ( European)
- Transducer Connectors ( North American )
- Speed Temperature Connectors
- NMEA Connectors
- MOUNTING BRACKET ASSEMBLY DRAWING
- OUTLINE & INSTALLATION DRAWING - EQ55 ECHO SOUNDER
- OUTLINE & INSTALLATION DRAWING - EQ55SA ECHO SOUNDER
- INSTALLATION INSTRUCTIONS FOR THE EQ 55.
- PART5.pdf
- PART6.pdf
- PART7.pdf
- PART8.pdf
- PARTA.pdf
- PARTB.pdf
950-70017001/Iss 1.2 EQ-55 Operators Manua
l
Page 6.4 Technical Informatio
n
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC Canada
(Con’t) Technical Specifications (General)
Expansion Ranges 3, 5, 10, 15, 20 meters
3, 5, 10, 15, 20 passi braza
2,4, 6, 8, 10 fathoms
10, 20, 30, 40, 50 feet
Noise Reduction Analog and digital filtering, plus ping-to-ping filter
Sound Velocity Adjustable 1400 to 1550 m/s
Maximum Ping Rate 8 pings per second
(5 pings per second when printing)
Transmit Power Adjustment Full power (1000 watts)
-10 dB (100 watts)
-20 dB (10 watts)
Depth Alarm Range 1 unit steps over full range
6.1.2 Display
Display
Number of Colors 16
Pixels Displayed 640 x 480
CRT Dot Pitch 0.29 mm
CRT Size 35.5 cm (14") diagonal
6.1.3 Accessory Output
Accessory Output
Printer Port Standard parallel printer interface (H.P. Paintjet only)
NMEA 0183 Output depth data
AUX 9 Pin D-Type Port LF & HF Buffer Output
6.1.4 Accessory Input
Accessory Input
Speed Adjustable, 100 to 25,000 p/n m
Temperature NTC thermistor (Airmar Std.)
NMEA 0183 Input GLL (latitude and longitude)
AUX 9 Pin D-Type Pore Ext Trig Input
Ext Sinc Output RS232 Pin 1,5,6