Instruction manual

Robertson AP11 Autopilot
36 20220513E
2.24 User settings
A group of user adjustable settings are provided in the AP11
autopilot. The settings are described below.
Display backlighting
Press and hold
MODE button
(From any mode)
STBY-AUT O
PWR
RESPONSE TURN
MODE
DODGE
AUTOPI LOT
ROBER TSON AP1 1
Rudder
STBY-AUT O
PWR
RESPONSE TURN
MODE
DODGE
AUTOPI LOT
ROBER TSON AP1 1
Rudder
Lighting can be set to eight different levels: 0 (Off) - 7
(brightest). The display returns to the previous one when
the Mode button is released.
Manual speed selection
Note ! Prior to making a manual speed selection it is
recommended that you study the "Transition Speed"
paragraph on page 74 to get a clear understanding of
the automatic speed selection feature.
The AP11 automatically selects the HI speed parameters at
turn on. If you change boat speed it is recommended that
you select HI or LO parameters correspondingly.
HI speed
response level
selected
LO speed
response level
selected
(From any mode)
Short press on both
and Mode buttons
STBY-AUTO
PWR
RESPONSE TURN
MODE
DOD GE
AUTOPILOT
ROBERTSON AP11
Rudder
STBY-AUTO
PWR
RESPONSE TURN
MODE
DODGE
AUTOPILOT
ROB ERTSO N AP1 1
Rudder
You can manually toggle between the two levels as shown.
The manually selected steering parameter set (HI or LO)
will remain in effect until AUTO mode is re-entered.