Instruction manual

Robertson AP11 Autopilot
30 20220513E
At the arrival of each waypoint:
ORIGIN
WAYPOINT 1
WAYPOINT 2
B
e
a
r
i
n
g
7
5
°
Waypoint arrival zone
(determined by the navigator)
Prompt displayed to advise
required course change
(Audible alarm sounds)
A
rrows show
direction that
boat will turn to
reach next WP.
Press MODE
to acknowledge
course change
XTE Display
Boat is 0,1 Nm to the left
of track after automatic
course change.
STBY-AUTO
PWR
RESPONSE T URN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
Rud der
STBY-AUTO
PWR
RESPONSE TURN
MODE
DODGE
AUT OPILOT
ROB ERT SON AP 11
Rudder
Regain manual steering at any time by a short press on the
Stby-Auto button.
Nav. displays in Auto Navigation mode
STBY-AUTO
PWR
RESPONSE TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
STBY-AUTO
PWR
RESPONSE TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
STBY-AUTO
PWR
RESPONSE TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
Rudder Rudder
Rudder
Press the MODE button to bring up the first nav. display.
This display shows the bearing and distance to next
waypoint. Press the MODE button once more to bring up
the second nav. display which shows Cross Track Error
(XTE) and waypoint name. A new press on the MODE
button will bring back the AUTO-NAV display. If the
MODE button is not pressed within 15 seconds after having
activated one of the nav. displays, it will automatically
return to the AUTO-NAV display.
Pressing the STBY-AUTO button from one of the nav.
displays, returns the autopilot to STBY-NAV mode.