Instruction manual

Robertson AP11 Autopilot
24 20220513E
When arriving within 10° of the new set course the display
will change from TURN to AUTO-COM. You may then
proceed with small (1°) course changes to set the final
course.
To re-take manual control, make a short press on the
Stby-Auto button to select STBY-COM.
Nav. displays in Auto Compass mode
STBY-AUTO
PWR
RESPONSE
TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
STBY-AUTO
PWR
RESPONSE
TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
STBY-AUTO
PWR
RESPONSE
TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
Rudder
Rudder Rudder
Press the MODE button to bring up the first nav. display.
This display shows the bearing and distance to next
waypoint. Press the MODE button once more to bring up
the second nav. display which shows Cross Track Error
(XTE) and waypoint name. A new press on the MODE
button will bring back the AUTO-COM display. If the
MODE button is not pressed within 15 seconds after having
activated one of the nav. displays, it will automatically
return to the AUTO-COMP display.
Pressing the STBY-AUTO button from one of the nav.
displays, returns the autopilot to STBY-COM mode.