Instruction manual

Robertson AP11 Autopilot
22 20220513E
Bearing waypoint - waypoint Cross Track Error (XTE)
STBY -AUTO
PWR
RESPONSE TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
Rudder
STBY -AUTO
PWR
RESPONSE TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
Rudder
or
The bearing waypoint to waypoint is only displayed if the
Nav. source is transmitting valid data. If bearing is not
available, the XTE display will show the magnitude of the
cross track error and direction to steer back to track.
2.10 Standby - Wind mode
This mode is available only when a valid wind source is
connected and when the boat type has been set to sailboat
in the Installation Menu
STBY-A UTO
PWR
RESPONSE TURN
MODE
DODGE
AUTOPILOT
ROBERTSON AP11
Ru dde r
The display will show apparent wind with Stbd (shown) or
Port arrow to indicate the direction the wind is coming
from.
2.11 Automatic Steering
The AUTO modes are used when you want the AP11 to
steer the boat automatically. Three different AUTO modes
are available dependent on the type of boat and the
configuration of your AP11 Autopilot system.