Instruction manual

Robertson AP11 Autopilot

20 20220513E

Press the STBY-AUTO button two times with an interval of

approx. 2 seconds. The zero point is now set and the display

will show:

STB Y-AUT O

PWR

RESPONSE TURN

MOD E

DOD GE

AU TOPILOT

ROBERTSON AP11

Rudd er

Operation

Follow the operating instructions on the following pages.

There is no further need for zero point settings until next

time you turn the autopilot on.

2.6 Non-Follow-Up electrical steering

Non-Follow-Up (NFU) steering is when you control the

rudder by a push button or a steering lever (also called time

dependent steering). The rudder will move as long as you

press the button or operate the lever.

STBY-AUTO

PWR

RES PO NSE TU RN

MOD E

DOD GE

AUTOPILOT

ROBERTS ON AP11

Ru dder

STB Y- AUTO

PWR

RES PONS E TUR N

MOD E

DOD GE

AU TOPI LOT

ROBERTSON AP11

Ru dd e r

When the <

< (Port) or >

> (Stbd) push button is pressed, the

rudder will move until the button is released. The Rudder

Command indicators will show the direction of the rudder

command and the actual rudder angle is shown on the

bargraph (1° per division up to ±20°).

“Rudder” angle

is 0°