Instruction manual

Instruction manual
20220513E 17
automatically if speed data is available, or can be set
manually by the user.
Three different backlighting colours are available for the
LCD display and user settings are provided for lighting
intensity and manual adjustment of steering parameters to
"fine tune" the steering of a particular boat.
Alarms are presented in plain English text to alert you of
system and external data failure conditions. Alarms will
appear on all control units, and include both audible and
visual presentations.
When underway in a AUTO mode, manual control of the
vessel can be regained on any control unit, or by pressing
the MODE button on the hand held remote control. It is
also possible to switch off the complete AP11 system at the
control unit, a very useful feature in an emergency
situation.
Heading Display
Compass heading
Set course
Bearing to WP
Cross Track Error (XTE)
A
pparent wind angle
Illumination level
Sea State value
Course change magnitude
Rudder Angle Display
(bargraph 1° per mark)
Rudder Command
indicator
Mode display
STBY (Standby)
A
UTO (Automatic)
REMOTE
A
lso displays:
Alarm text
WP name
Distance to WP
Sea State setting
Turn (Tack) mode
Port push button
Port rudder command (STBY)
Course change to port (AUTO)
Manual HI/LO speed select
Sea State filter ad
j
ust
(
-
)
STBY- AUTO
push button
On/Off button
Standby/Auto select
Dod
g
e select
Mode/Light button
Heading source select
Illumination level adjust
A
ctivates:
Response (HI/LO speed)
Sea State
Dodge
Turn (Tack)
Heading Source
COM (Compass)
NAV (Navigation)
W/A (Wind Angle)
A
lso displays turn angle
STBD push button
Stbd rudder command (STBY)
Course change to Stbd (AUTO)
Turn (Tack) mode select
Sea State filter adjust (+)
HI / LO speed
indicator