Instruction manual

Simrad EK60
44
850-164696 / A
C11 / C12 - Serial lines (RS-232)
The computer must be provided with minimum two serial lines
for communication with external sensors. Additional serial lines
may be added if required.
The serial lines are identified as COM1 and COM2.
→ Cable details on page 61.
C13 / C14 / C15 - Future expansion
These cables are presently not in use.
C16 / C17 - USB interfaces
Most current computers have one or more USB interfaces.
These are not required by the EK60 system.
C18 - FireWire interface
Most current computers have a FireWire interface. This is not
required by the EK60 system.
C20 - Remote
This is the remote power control cable from the GPT. It is often
terminated in a small on/off switch box close to the computer
and display. This box is not supplied by Simrad.