Instruction manual

Simrad EK60
42
850-164696 / A
Computer and display cables
The cables shown and specified here are those used when the
EK60 is implemented with a standard separate Processing Unit.
Since the computer may be supplied by a third party vendor, the
interface availability will change. The most common interfaces
are included in this cable layout, and those not required by the
EK60 system are identified accordingly.
Figure 20 Cable layout with standard Processor Unit
C3
Display cable
C5 AC power
C11
Serial line 1 (COM1)
C12
Serial line 2 (COM2)
C9
Secondary ethernet
C16 USB1 (not used)
C17 USB2 (not used)
C18 Firewire (not used)
C4
Printer
C6 AC power
C10
Ethernet to
GPT(s)
C20
Remote
C2 Mouse
C1 Keyboard
C7
Ship's GND
C8
Ship's GND
(CD6939A)
(Optional item)
GPT Remote
control
C1 - Keyboard
This is a standard computer keyboard cable. In most cases it is
physically attached to the keyboard.
→ Cable details on page 66.