Instruction manual

Cable layout
41
850-164696 / A
4.2 Cable plans and specifications
Configurations
The system cables are identified in following cable plans. Each
cable is identified with a cable number (Cx). Further
information about the cable (connections and specifications)
may be found on the referenced page(s).
The following main configurations are available:
• Basic configuration with standard Processing Unit
• General Purpose Transceiver (GPT)
• GPT Cabinet
Several variations may be built based on these main
configurations.
Basic configuration
The basic configuration comprises a single General Purpose
Transceiver (GPT), a Processor Unit (computer) and a display.
An optional ethernet switch is added for interface purposes.
More than one GPT
More than one GPT may be used. An ethernet switch is then
required for interface purposes.
GPT Cabinet
The GPT Cabinet configuration uses a steel cabinet to provide
IP55 protection. One or two GPT units may be installed in the
cabinet, as well as an ethernet switch if required.