Instruction manual

Simrad EK60
18
850-164696 / A
2.7 Printer
Introduction
Any Microsoft Windows compatible printer may be connected
to the EK60 Processor Unit. The connection is made with a
standard Centronics type parallel cable.
Hardware installation
Refer to the applicable printer documentation for hardware
installation. Make sure that the printer is securely mounted to
withstand the shock, vibrations and movements experienced on
a ship.
Driver installation
In order to use the printer, you must install the necessary
driver(s) and set up the EK60 Processor Unit so that the
presence of the printer is known. To do this, you will need to
use the standard Microsoft Windows tools on the computer.
Observe this procedure on a Windows XP computer.
1 Terminate the echo sounder program.
2 Press the Start button in the lower left corner, and activate
the Settings option on the menu.
3 On the Settings sub-menu select Printers and Faxes.
4 On the next submenu, select Add Printer.
5 Allow the wizard to guide you through the rest of the
installation process.