Instruction manual

Simrad EK60
16
850-164696 / A
2.5 Processing Unit (computer)
Power supply
A stable power supply is necessary to provide power to the
system’s computer(s) and other components. An uninterrupted
power supply (UPS) is recommended to supply power to the
computer(s) to protect against power spikes or failure which can
damage their electronic components and ability to retrieve
valuable stored data.
Computer requirements
The following information is subject to change:
• Operative System - Windows 2000 (SP4), Windows XP
• Processor - 500 MHz or better
• Memory - 128 MB or better
• Hard Disk - 10 GB or better
• CD Station - for software installation
• Optional - Tape Streamer/Zip drive/additional hard disks for
backup purposes
• Network - Net adapter card(s) and appropriate cabling is
required if computers are to be connected to a network.
Computer location
The EK60 computer must be loacted in a dry and well ventilated
room. The use of shock absorbers is strongly recommended.
Note that the maximum lenght of RS-232 cables is less than 10
meters.
Simrad Processing Unit
A customized EK60 Processing Unit computer may be provided
by Simrad. This is a ruggedized computer in a specially
designed casing with solid shock absorbers.