Installation manual

Simrad Echo sounder transducers

SIMRAD TRANSDUCERS

This chapter presents a list of all the current Simrad transducers.

For each transducer, information is provided to establish:

• the transducer type and frequency

• the opening angle(s)

• the order number for the transducer

• the order number for the transducer cable

• how it is connected to the General Purpose Transceiver (GPT)

unit

This list was correct at the time of writing. However, new

transducers are frequently added to the product range. For an

updated list of all the currently available transducers, refer

to w

ww.sim rad.com. Product speciﬁcations and installation

documents can be downloaded from the web site.

By means of various hardware and software conﬁgurations and

adjustments, the General Purpose Transceiver (GPT) unit is used

with the following echo sounder systems:

•SimradES60ﬁsh ﬁnding echo sounder

• SimradEK60scientiﬁc echo sounder

• Kongsberg Maritime’s EA 400 hydrographic echo sounder

• Kongsberg Maritime’s EA 600 hydrographic echo sounder

Topics

All 12 kHz transducers on page 41

All 18 kHz transducers on page 41

All 27 kHz transducers on page 41

All 38 kHz transducers on page 42

All 50 kHz transducers on page 44

All 70 khz transducers on page 45

All 120 khz transducers on page 46

All 200 kHz transducers on page 47

All 710 kHz transducers on page 49