Extra Information

6 |
AP70/AP80 | Addendum for sw release 1.2
Select Backup Navigator Alarm for Handshake 1 or 2, depending on physical connection of
external switch.
Track oset
The track offset options allows for steering parallel to the track
in NAV mode.
You activate the track offset option by pressing and holding
the rotary knob on the AP70/80. The display will change to
show current distance from track (XTD) and set offset (OFF).
Turn the rotary knob to adjust the offset distance. The red line
shows the offset in relation to the track.
The system will remain in track offset mode as long as there is
an offset value. It will time out when the offset distance is set
to 0 (zero).
¼ Note: Track offset is not available in Track mode.
S-turns
When activating the S-Turn pattern the boat will yaw around the main course.
You set the selected course change before the turn is started. During the turn you can alter
the course change and the turn radius.
The main course can be changed by turning the rotary knob.
¼ Note: The S-turns are only available in AUTO mode.
Activating the S-turn option
Before the S-turns mode can be applied it must be enabled in the turn settings thus making it
available in the turn settings dialog.