Operation Manual

Operation
20220505H 25
2.14 Dodge in NAV
DODGE
347
RFC
HEADING
Returns to NAV mode at the current track
(not recommended as it may result in a big course change)
Wheel
both
Non Follow Up
Follow Up
Perform dodge using:
DODGE
TURN
Press to activate Dodge mode:
or
DODGE
TURN
AUTO
SPEED
Selects NAV mode at present position with
new bearing to waypoint
NAV
SETUP
Selects AUTO mode with current heading as set course
AUTO
SPEED
NEXT WP
350
7.2
Fishing
nm
o
BRG
DST
N 0.1nm
To return from Dodge mode press one of the following buttons:
2.15 TURN-mode
The AP20 provides a special U-turn feature when in AUTO
mode. This feature is very useful in a man overboard situation.
U-Turn changes the current set course to be 180 degrees in the
opposite direction. The user may decide if the U-Turn should be
made to Port or Starboard to bring the boat on the new course.
U-Turn is activated by a quick double press on the DODGE
button. The AP20 will continue on the set course until you press
either the PORT or STBD button to select the direction to make
the U-Turn. If you do not press PORT or STBD within 1 minute,
the AP20 will return to the AUTO mode and stay on course.
Boat makes STBD U-turn
00
RFC
HEADING
RUDDER
U-TURN
PORT STBD
LOG -HI
P
S
PRESS
DODGE
TURN
DODGE
TURN
Press to select STBD U-turn
Quick double press
to enter TURN mode