Operation Manual

Installation
20220505H 103
Autotrim
standard value is 40 sec. which should work well on
most boats.
Rudder Limit
should be kept at 20 degrees unless there is a
need for more rudder when performing dockside manoeuvres.
Caution ! In no event should the Rudder Limit be set to a value higher
than the actual maximum rudder angle.
Exit the Parameter menu by pressing STBD [>] button to
proceed to the Display Units menu, or press STBY to return to
normal AP20 operation.
NMEA Test
This menu item is for trouble shooting only. Do not pay attention
to the readings on the display if the system interface is OK.
Proceed to the Display Units menu by pressing the STBD [>]
button, or press STBY to return to normal AP20 operation.
Display Units
DISPLAY UNITS
WIND SPEED kt (m/s)
WATER TEMP F ( C )
DEPTH ft ( m )
POS FORMAT 00'(000)
Use STBD button to select item and course knob to select the
appropriate unit.
Correct setting of counter
rudder, ideal response
New course