USER MANUAL Washing Machine 119730102 SWT554 SWT604 SWT704 SWT754 SWT954
3 3 3 4 4 5 Conditions of use washing machine Choose the water level Choose the wash water temperature Choose the soak time Lid lock feature (model SWT954) , End of program, Rinse option How dose Eco Rinse work? Eco option Water return Water save, Rinse save Drain Hose And Return Hose (Model: SWT754) What to do after you have finished your washing, Cleaning the lint filter 7 7 7 7 8 8 8 9 9 10 10 11 11 12 12 13 14 14 15 15 16 16 17 17 18 18 18 19 20 21 22 24
SECTION A: Knowing your washing machine CONDITIONS OF USE This appliance is intended to be used in household and similar applications such as: - Farm Houses. - By clients in serviced apartments, holiday apartments and other residential type environments. It must not be used for purposes other than those for which it was designed. PARTS OF THE WASHING MACHINE This booklet talks about different parts of your washing machine. The main ones you need to know are shown on the diagrams below.
THE DIFFERENCE BETWEEN THE DEEP RINSE AND ECO RINSE OPTIONS. (See page 14 for rinse option instructions) Eco rinse option When Eco rinse is used, rinse water is sprayed into the wash bowl in pulses. After each pulse the wash bowl will spin to remove detergent laden water from the clothes. Normally the machine will go through a series of six pulse sprays and short spin cycles in this manner, followed by the final long spin that removes the water from the clothes to complete the wash.
MODELS: SWT704, SWT954 1 2 3 4 1 Program selector dial See page 9. 4 Soak Time Button See page 11. 2 Water Level button See page 10. 5 Rinse Option Button See page 14. 3 Temperature Button See page 11. 6 Start/Pause Button See page 12. 5 6 7 7 Display See page 12. MODEL: SWT754 1 2 3 4 1 Program selector dial See page 9. 4 Soak Time Button See page 11. 2 Water Level button See page 10. 5 Eco Option Button See page 15. 3 Temperature Button See page 11.
If you have frequent out of balance interruptions, it may be due to your washing machine not standing firm and level on the floor. This can be corrected by adjusting the washing machine legs as described in the Installation Instructions supplied with your machine. Button response and lights Always press buttons gently. Watch the lights on the control panel to see the effect pressing a button or turning a program selector knob has, and listen for ‘BEEPS’.
ADD THE DETERGENT 1. Measure the correct amount of powder or liquid detergent by following the recommendations on the package. 2. Mix detergent in one litre of hot or warm water. 3. Add the pre-mixed detergent to the wash load. Don’t do these things: * Using too little detergent will give you a poor wash result. * Using excessive detergent will create to many suds and may cause overloading of the motor during the spin stage of the wash cycle. To avoid excessive suds, reduce the amount of detergent you use.
START YOUR WASHING MACHINE AS FOLLOWS 1. Turn on the taps and turn power on at the power point Model: SWT954 2. Close the lid 3. Press the POWER button (only model SWT954) at the back of control panel above the rating label. The machine will ‘beep’ twice and show a pattern of lights. Wait for this to happen before attempting to operate the machine. Your washing machine is now in pause mode and ready to wash your clothes.
YOUR PROGRAM GUIDE Default Program Select this Program Off To reset a program and to switch off the machine. Water Level Temp. Soak - - - Rinse*** Option - Regular Wash For an average domestic load of mixed fabrics. Full Warm No Soak Eco Rinse Cold Wash For synthetic or mixed fabrics, underwear, coloured garments, non-shirnk shirts, blouses. High Cold No Soak Deep Rinse Fast Wash For a very small load of mixed fabrics.
CHOOSE THE WASH WATER TEMPERATURE For each wash program your washing machine automatically selects a suitable fill water temperature. If you want to use a different wash water temperature, press the WATER TEMP button repeatedly. The water temp lights will tell you the temperature for each press of the button. You have four temperatures to choose from Very Hot, Hot, Warm and Cold. The temperature of warm water will depend on the temperature and pressure of your hot and cold water supplies.
TO START THE WASH CYCLE / PROGRAM Press the START/PAUSE button. START/PAUSE is used to Start, Stop and Continue the wash. If you have started your wash and you wish to stop it for some reason, press the START/PAUSE button and hold it for 1.2 second to enter pause mode MACHINE IN PAUSE MODE You can tell when your washing machine is in pause mode. The time remaining is shown then “ SP ”. WASH CYCLE IN PROGRESS After selecting a program, the duration is displayed in hours and minutes (for example 2.05).
SECTION C: Features of your washing machine Additional features on your washing machine are described in this section. INFORMATION AND GUIDANCE FEATURE The washing machine will give you information by using the control panel display and "beeping" function. Display will show ‘ ’and ‘FLASHING’ 4 Display will show ‘ 1 ’and ‘FLASHING’ 4 1 Time remaining is shown then ‘ SP ’ Display will show ‘ 0.
RINSE OPTION (Models: SWT554, SWT604, SWT704, SWT954) Pressing the “Rinse Option” button allows you to change the rinse type. For most washes the machine automatically selects “Deep Rinse” for you. There are four rinses to choose from… Fast rinse, Eco rinse, Deep rinse and Extra rinse. Extra Extra rinse, the machine fills twice, giving you two deep rinses. Deep Deep rinse the machine fills once, giving you one deep rinse. Eco Eco rinse is a spray rinse giving you maximum water saving.
ECO OPTION (Model: SWT754) Pressing the “Eco Option” button allows you to change the Eco options. You can select: Water Return to return water to the washing machine from the laundry trough. Water Save to automatically save your wash water for use in your next wash load. Rinse Save to automatically save water from the rinse cycle for later use. Eco Rinse Eco rinse is a spray rinse giving you maximum water saving (for more information, see page 14).
Water Save To automatically save the wash water: Press the ECO OPTION button pad until the WATER SAVE light is ‘ON’. Your washing machine will pump the sudsy wash water into the laundry trough at the end of the wash cycle. Rinse water will be pumped down the drain. IMPORTANT: If your trough is not big enough to hold all of the wash water, a stand pipe or overflow drain should be fitted. Rinse Save CAUTION: Do NOT reuse rinse water for the next wash if fabric softener has been used.
Rotate Selector knob to “Off” position. Turn of power switch (only model SWT954). 5.
CLEANING STAINS IN THE WASH BOWL Stains in the wash bowl can be caused by: metal objects such as bobby pins, dressmaking pins and nails. salt IMPORTANT: Check all pockets before loading clothes into your washing machine. Don’t leave wet clothing (especially swimwear) in the bowl for too long before you wash it. How to clean the stainless steel wash bowl Wipe with a cleaning product which is marked suitable for stainless steel. IMPORTANT: Never use bleach cleaners or steel wool.
SECTION E: Handy washing hints This section gives you some help in dealing with washing problems. Chemicals referred to on pages 19 and 20 are available from your local supermarket, hardware store or the chemist.
CREAM and MILK 20
SECTION F: Don’t call for service until you’ve checked these points IMPORTANT: If you call for service and there is nothing wrong with your washing machine, you will have to pay for the service call. You will have to pay even when your washing machine is under warranty. Before you call for service, check the points in the table below. Problem Display Code Machine not working Machine has washed load but will not spin. Water in washbowl.
OTHER DIAGNOSTIC HELP AND A GUIDE FOR WHEN YOU SHOULD CALL FOR SERVICE If you are having a problem with your washing machine, make sure you have followed ALL of the instructions on page 21 in the “What to do” column before calling for service. Description Display Code Customer action (Summary) Make sure both wall taps are on and hose filters are not blocked. Raise drain hose if water is flowing out of drain hose. Press START/PAUSE to re-start wash.
From the Electrolux Group.
