User Manual

Remove the polystyrene packaging
materials.
Remove the plastic bag on top of
the machine.
Remove the cardboard top.
29
INSTALLATION11.
4.
5.
Remove the polystyrene base.
6.
Put one of the polystyrene «A»
packaging elements on the floor behind
the appliance. Carefully put down the
appliance with the rear side on it. Make
sure not to damage the hoses.
Pull up the appliance in vertical
position.
11.1 Unpacking
You are advised to keep all transit
devices so that they can be refitted if
the machine ever has to be transport-
ed again.
All transit bolts and packing must be
removed before using the appliance.
CAUTION!
Use gloves. Remove the external film.
If necessary, use a cutter.
1.
2.
Open the door.
Remove the
polystyrene
piece from
the door seal
and all the
items from
the drum.
3.