User manual

8 use
Select the required program
Attention!
Program Option buttons
Turn the program selector dial to the
required program.
The green Start/Pause light starts to flash.
Depending on the program, different
functions can be combined. These must
be selected after choosing the desired
program and before depressing the
Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on. When
they are pressed again, the pilot lights go
out.
Press the Spin button repeatedly to
change the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
The relevant light will light up.
Maximum speeds are:
Cottons and Hand Wash: 1000 rpm;
Delicates and Synthetics: 700 rpm.
The selector dial is divided into following
sections:
The selector dial can be turned either
clockwise or anticlockwise. Position “Off”
to Reset program/Switching OFF the
machine.
If you turn the program selector dial to
another program when the machine is
working, the red Start/Pause pilot light will
flash 3 times to indicate a wrong
selection. The machine will not perform
the new selected program.
At the end of the program the selector
dial must be turned to position “Off”,
to switch the machine off.
Cottons
Synthetics
Delicates
Hand Wash
Rinse, Drain, Spin.
Select the Spin Speed, No Spin or
Rinse Hold option
For SWF10761
SWF10761 SWF85661
Cottons, Synthetics and
Hand Wash: 850 rpm;
Delicates: 650 rpm.
For SWF85661