User manual

After having pressed the Start/Pause
button, the “Washing” pilot light comes
on.
The “Door Lock” pilot light indicates if the
door can be opened:
When the program has finished, the “End
Cycle” pilot light comes on.
It is possible to change any option before
the program carries it out.
The option “Fast Wash” cannot be
modified after the Start/Pause has been
pressed.
Changing a running program is possible
only by resetting it. Turn the program
selector dial to “Off” and then to the
new program position. The washing
water in the tub not be emptied out.
Start the new program by depressing
the “Start/Pause” button again.
When the pilot light “Washing” comes on
this means that the machine is performing
the washing cycle.
use 11
light on: the door cannot be opened.
The appliance is running.
light off: the door can be opened.
The washing program is finished.
Program progress display
Altering an option or a running
program
To start the selected program, press the
“Start/Pause” button; the corresponding
green pilot light stops flashing.
To interrupt a program which is running,
depress the “Start/Pause” button: the
corresponding green pilot light starts to
flash.
To restart the program from the point at
which it was interrupted, press the
“Start/Pause” button again.
If you have chosen a delayed start, the
machine will begin the countdown.
The “Washing” and “Door Lock” lights
are on to indicate that the appliance starts
operating and the door is locked.
Select the Start/Pause