Technical data

Control Panel 7
3.1 Program Selector Knob
Turn this knob to set a wash
program, the machine will
automatically select the spin speed
and temperature for selected
program.
The selector knob can be turned
either clockwise or anticlockwise.
Position “ ” to reset program/
switching OFF the machine.
At the end of the program the
selector dial must be turned to
position “ ”, to switch the
machine off.
3.3 Spin Selection Button
3.4 Rinse Hold Button
Press this button to increase or
decrease the spin speed, if you
want your laundry to be spun at a
speed different from the one
proposed by the washing machine.
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent
the laundry creasing.
The door is still locked to indicate
that the water must be emptied out.
3.2 Temperature Button
Press this button repeatedly to
increase or decrease the wash
temperature if you want your
laundry to be washed at a tempera-
ture different from the one
proposed by the washing machine.
3.5 Quick Wash Button
To empty out the water:
Select “Spin” or “Drain” program.
Reduce the spin speed if needed.
Press the button Start/Pause.
The appliance will drain the
water and then spin.
3.6 Rinse Plus Button
This option is recommended for
people who are allergic to
detergents, and in areas where the
water is very soft.
Press it to add rinsing phases to a
program.
The indicator of this option comes
on.
This option can be used for lightly
soiled laundry in order to obtain a
good washing result in a short time.
The washing time will be reduced
according to type of fabric and the
selected temperature.
At the end of program the display
will show ‘ ’ and the ‘Door Lock’
indicator goes off. The door can
be opened.
3.7 Display and Door Lock
Indicator
A
Digital Number will show:
-
B
C
Delay Start Icon
D
Child Lock Icon
Door Lock Indicator
Washing cycle time.
LED on, you cannot open the
door.
LED off, you can open the door.
-
The alarm codes. Refer to the
chapter “Troubleshooting” for
their description.
-
Delay start time.
B
A
C
D