Specifications

6 |Spring Farmer's Buyers Guide
2½" Gauge
• ¼" MIPT, – PSI
2½" Gauge
• Glycerin lled, ¼" MIPT, – PSI
Model 7560C
• Cast iron pump, also available
in Ni-Resist or Silver Series housing
• Maximum ow:  gpm/. l/min. at , rpm
• Maximum pressure:  PSI/. BAR
• Maximum rated speed: , rpm
• Maximum uid temperature: °F/°C
• Shaft: ⁄" solid, Port sizes, ¾ NPT
Model 9300
• Mounting almost anywhere
on tractor or sprayer, Series 
becomes part of the vehicle's hydraulic
system and frees the PTO for other uses
• “Close–coupled” design reduces mounting space
– a single stainless steel shaft is common to both
pump and motor
• Pump construction: Epoxy–coated cast iron
housing, nylon impeller, two needle main bearings
and an outboard, double sealed factory–lubricated
ball bearing
• Viton sealing element standard
Roller Pumps
• 5 roller, cast iron, output to 46.5 gpm,
pressure to 200 PSI
• 6 roller, cast iron,
output to 19.5 gpm,
pressure to 300 PSI
• Also available
in reverse rotation,
Ni-resist, or Diamond Series
• 7 roller, cast iron,
output to 22.5 gpm,
pressure to 200 PSI
• Also available
in reverse rotation,
Ni-resist, or Diamond Series
• Maximum ow 140 gpm
• Maximum pressure 170 PSI
• 1½" inlet x 1¼" outlet CCW
• Maximum speed 6,000 rpm
• Pedestal mount can be used
for direct or belt drive
Centrifugal Pumps
• 20 GPM at 100 PSI
• The 206 motor requires 7 GPM hydraulic uid in-
put and ts virtually all tractor hydraulic systems
• Recommended for: John Deere type pressure
compensating closed centre systems, Case-IH
type load sensing closed centre systems. Open
centre systems with capacities from 7 to 16 CCW
• 150 Series High Performance
• 1½" x 1¼" CCW
Centrifugal Pumps
• The 210 motor requires 10 GPM (37.9 LPM)
maximum hydraulic uid input
• Recommended for: Load sensing closed
center systems
• Open center systems up to 17 GPM (64.4 LPM)
using internal needle valve bypass
• 1¼" suction x 1" discharge
• Maximum 75 GPM at 10 PSI, 20 GPM at 90 PSI
12V Diaphragm Pump
• By–pass pump w/electric package
• 1.4 gpm, 60 PSI internal by – pass with built – in
on/o switch
• ⁄" NPT – Female ports
Pressure Gauges
• Measure PSI performance
$
17
30
each plus GST
$
6
93
each plus GST
$
254
05
each plus GST
$
1,021
34
each plus GST
$
337
32
each plus GST
$
160
47
each plus GST
$
238
78
each plus GST
$
464
52
each plus GST
$
932
90
each plus GST
$
1,100
33
each plus GST
$
143
09
each plus GST
Hypro, Delavan
Ace & SHURflo Pumps
SPP 75009
SPP 70001
SPP 75021
SPP 70053
SPP 70223
SPP 70067
SPP 70284
SPP 70203 (FMC-HYD-210)
SPP 70207
SPP 70006
SPP 70004