Specification

C-FS11 © 2011 SIMPSON STRONG-TIE COMPANY INC.
Simpson Strong-Tie
®
Fastening Systems
170
QUIK DRIVE
®
– Collated Screws
FEATURES:
• Bugle head
• #2 Phillips drive
(Driver bit in each box;
replacement bit model BIT2P)
• High-low threads
• Sharp point
• Gray-phosphate
coating
• Curved collation
Length
(in.)
Shank
Size
Carton
Quantity
Model No.
PRO
250DW
1
7
⁄ 8 #6 2000 DWHL178PS
3
See the General Load Table on page ___ for screw strength and shear-wall loads when
used to install
1
⁄ 2 " gypsum drywall.
FEATURES:
• Bugle head
• #2 Phillips
(Driver bit in each box;
replacement bit model BIT2P)
• Fine threads
• Sharp point
• Gray-phosphate coating
• Curved collation
Codes/Standards:
ASTM C1002-04 Type S compliant
Length
(in.)
Shank
Size
Carton
Quantity
Model No.
PRO
200
1 #6 2500 DWF1PS
3
1
1
⁄ 4 #6 2500 DWF114PS
3
1
5
⁄ 8 #6 2500 DWF158PS
3
DWHL Screw
Common Application: Drywall to wood
DWF Screw
Common Application: Drywall to cold-formed steel (Recommended thicknesses: 33, 27 and 18 mils 20, 22 and 25 ga.)
FEATURES:
• Bugle head
• #2 Phillips
(Driver bit in each
box; replacement bit
model BIT2P)
• Coarse threads
• Sharp point
• Curved collation
Available Coatings:
Gray phosphate,
yellow zinc, N2000
®
mechanically galvanized
Codes/Standards:
ASTM C1002-04 Type W
Length
(in.)
Shank
Size
Retail Pack Contractor Pack
PRO
200
PRO
250DW
Fasteners
Per Pack
Model No.
Fasteners
Per Pack
Model No.
Black/Gray-Phosphate Coating
1 #6 • • 2500 DWC1PS
3
1
1
⁄ 4 #6 1000 HCK DWC114PS 2500 DWC114PS
3
1
5
⁄ 8 #6 1000 HCK DWC158PS 2500 DWC158PS
3
2 #6 • • 2000 DWC2PS
33
2
1
⁄ 2 #8 • • 1500 DWC212PS
3
Yellow-Zinc Coating
1
1
⁄ 4 #6 • • 2500 DWCZ114PS
3
1
5
⁄ 8 #6 • • 2500 DWCZ158PS
3
2 #6 • • 2000 DWCZ2PS
33
N2000
®
Coating
1
1
⁄ 4 #6 • • 2500 DWCG114PS
3
1
5
⁄ 8 #6 • • 2500 DWCG158PS
3
DWC Screw
Common Application: Drywall to wood
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments
and with some preservative-treated woods. For applications in higher-exposure applications, consider type-300 series stainless-steel fasteners
for superior corrosion resistance. See pages 10-13 for additional important information before selecting a fastener for a specific application.
For information on corrosion, materials and coatings, see pages 10-13.