Installation Guide

INSTALLATION OVERVIEW

Carefully remove the umbrella and all contents from the box. Locate the Finial (D) and the Solar Panel (C) . Separate the

Plastic Cap (F) from the Finial (D) by twisting the Cap (F) counter-clockwise approximately 1/4 turn and pulling apart.

Wit h the Cap (F) removed from the top of the Finial (D), line the tabs on the bottom of the Solar Panel (C) up with the slots

inside the top of the Finial (D). Insert the bottom of the Solar Panel (C) into the top of the Finial ( D) and twist clockwise

approximately 1/4 turn until it is secure.

NOTE: To increase the lifespan of the Solar Panel (C) it is recommended it be removed and stored away when not in use

for extended periods of time. Always install the Plastic Cap (F) onto the Finial (D) for protection when the solar panel is

removed.

With the Solar Panel (C) installed securely onto the top of the Finial (D), insert the threads on the bottom of the Finial

(D) into the top of the Umbrella (A). Turn the Finial (D) clockwise to tighten the threads until the Finial (D) is

secure on the Umbrella (A) . Check to ensure that the Solar Panel (C) did not come loose in this process and is still

securely on top of the Finial (D).