Installation Guide
1. Read instructions carefully before attempting to install.
2. Disconnect power before installing or servicing.
3. Wire light in
accordance with local codes and ordinances.
WARNING: Risk of fire or electric shock. LED retrofit kit installation requires knowledge of luminaire
electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
WARNING: Install this kit only in luminaires with the construction features and dimensions shown in the
drawings below. Do not make or alter any open holes in an enclosure of wiring or electrical components
during kit installation.
WARNING: To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or
other sharp objects.
THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE
SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY CSA OR AUTHORITIES HAVING
JURISDICTION (AHJ).
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
Installation Guide: 4" Downlight Retrofit
L5/9-DL4-27/50-D-ADJ
Parts and Housing Dimensions
E26 Socket Adapter
Retrofit Kit
4"
5.5"


