Specification Sheet

ManualsBrandsSimply Conserve ManualsOtherSimply Conserve Pack of (30) 14 Watt Cool White T8 Bi Pin (G13) LED Bulbs

1701 Charleston Regional Parkway, Suite A | Charleston, SC 29492

(843) 971-1414 | www.amconservationgroup.com

AM CONSERVATION GROUP//COMMERCIAL LIGHTING

Rated Power (W): 14W

Color Temp (CCT): 3500K, 4000K, 5000K

Typical Lumens (lm): 1900 lm

Efﬁcacy (lm/w): 135

Voltage (V): 100-277V

Beam Angle: 180°

Operation Temperature: -4 F - 110 F

Storage Temperature: 30 F to 95 F

Input Voltage (V): 100-277V AC

Power Factor: > .95

THD: 20%

Line Frequency: 60 Hz

Dimmable: No

Target Replacement Lamps: F25T8 (4ft), F28T8 (4ft)

F30T8 (4ft), F32T8 (4ft)

• UL Type B

• Easy retrot into most common linear uorescent

xtures

• Runs cool with minimal heat output

• No UV or IR radiation

• Durable, shatter resistant materials

• End-to-end lighting with no dark spots

• Suitable for used in damp and dry locations

• Suitable for use in enclosed xtures

• This product is rated for indoor use only.

• Single-end powered. Can work with 100-277V AC

power directly

*Compared to a 32 watt uorescent T8 and based on an average of $0.11 per kWh.

PRODUCT FEATURES OVERVIEW

POTENTIAL LIFETIME SAVINGS: 900 KWH/$102*

LED T8 | UL TYPE B | SINGLE-END BYPASS

L14T8PC35BSE - L14T8PC50BSE SERIES

5-YEAR LIMITED WARRANTY*

*AM Conservation Group, Inc. guarantees to the original purchaser or recipient of

this lamp that it is free from defects in material and workmanship for ve years from

the date of purchase. Warranty is limited to repair or replacement of the lamp. Lamps

being returned must included proof of purchase.

Simply Conserve LED T8 lamps are a perfect solution when upgrading

traditional linear T8 or T12 uorescent xtures to energy saving, LED

technology. These lamps are designed to deliver 1900 lumens using half the

power of a traditional 32W Fluorescent. The singled-ended design is ideal

for applications using non-shunted tombstones and operates with 100-277v

AC power. The durable aluminum and polycarbonate construction makes

this an ideal solution for use in most commercial environments.

5-YEAR LIMITED WARRANTY*

Summary of content (4 pages)

PAGE 1
A M C O N S E R VAT I O N G R O U P//C O M M E R C I A L L I G H T I N G LED T8 | UL TYPE B | SINGLE-END BYPASS L14T8PC35BSE - L14T8PC50BSE SERIES Simply Conserve LED T8 lamps are a perfect solution when upgrading traditional linear T8 or T12 fluorescent fixtures to energy saving, LED technology. These lamps are designed to deliver 1900 lumens using half the power of a traditional 32W Fluorescent.
PAGE 2
A M C O N S E R VAT I O N G R O U P//C O M M E R C I A L L I G H T I N G LED T8 | UL TYPE B SINGLE END | DIRECT REPLACEMENT L14T8N35A - L14T8N50A SERIES SPECIFICATIONS BY MODEL ITEM # WATTS TYPE SIZE CCT LUMENS CRI VOLT CONSTRUCTION CERTIFICATION L14T8PC35BSE 14W Type B 4ft 3500K 1900 >80 100-277V PC UL, DLC L14T8PC40BSE 14W Type B 4ft 4000K 1900 >80 100-277V PC UL, DLC L14T8PC50BSE 14W Type B 4ft 5000K 1900 >80 100-277V PC UL, DLC MODEL SELECTION FAMILY L = LED Line
PAGE 3
A M C O N S E R VAT I O N G R O U P//C O M M E R C I A L L I G H T I N G LED T8 | UL TYPE B SINGLE END | DIRECT REPLACEMENT L14T8N35A - L14T8N50A SERIES INSTALLATION INSTRUCTIONS 1. Bypass ballast by cutting all wires as in Fig. 1 2. Replace shunted lamp holder with non-shunted one if applicable (Instant Start) 3. Directly wire Live + Neutral on a single end as in Fig. B for single tube or as in Fig. 3 for multiple tubes Cautions: 1. This product is rated for indoor use only.
PAGE 4
A M C O N S E R VAT I O N G R O U P//C O M M E R C I A L L I G H T I N G LED T8 | UL TYPE B SINGLE END | DIRECT REPLACEMENT L14T8N35A - L14T8N50A SERIES INSTRUCTIONS 1) Make Sure Power is OFF 2) Remove lens or diffuser (if applicable) 4) Bring LED lamp to luminaire and insert lamp pins into luminaire lamp holders. 5) Rotate LED lamp until lamp locks in place. Ensure that the LED lamp front points away from the back of the luminaire.