Installation Guide

1701 Charleston Regional Parkway, Suite A | Charleston, SC 29492
[phone] | www.amconservationgroup.com
AM CONSERVATION GROUP//COMMERCIAL LIGHTING
SIMPLY CONSERVE | 12.5W | J-BOX DOWNLIGHT - REMOTE DRIVER | 6” | 3000K | IC RATED
DRIVER WIRING:
1. Open the hardwire box swing cover and remove the appropriate knockout(s).
2. Insert the electrical supply cable through the knockout and secure with a cable connector (sold seperately).
3. Using wire nuts, connect green ground wire of cable to green wire on box. Connect white wire of cable to
white wire of box. Connect black wire of cable to black wire of box. (Fig.1)
4. Place all wiring and connections back in to the box and close the cover.
5. Insert hardwire box through the mounting hole. (Fig.2)
New construction applications: Hardwire box should be rmly secured to studs, joists, or similar xed
structural units.
Remodel applications: Does not require the hardwire box to be rmly secured after the mounting plates,
studs, joists, or structural units have been concealed.
FIXTURE INSTALLATION:
1. Connect the xture to the hardwire box by inserting and twisting the male/female connectors. (Fig.3)
2. Push spring loaded clips on the xture upwards and insert xture base in to the mounting hole. Release the
clips and xture will be pulled ush to the ceiling. (Fig.4)
3. Once assembly is complete, turn on power to conrm xture is working properly.
HOLE CUT
SIZE
L12DLS630D
Ø6-1/4”(158mm)