Installation Guide

1. Read instructions carefully before attempting to install.
2. Disconnect power before installing or servicing.
3. Wire light in accordance
with local codes and ordinances.
WARNING: Risk of fire or electric shock. LED retrofit k
it installation requires knowledge of luminaire
electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
Installation Guide: 6" Adjustable Wafer Downlight
L12-DLR6-27/50-D-ADJ
Installation Steps:
Step 1: Before fixture installation, select preferred CCT by
moving the switch to 2700K, 3000K, 3500K, 4000K, or 5000K.
Step 2: Select desired method of cutting hole (i.e. hand saw,
hole saw). CAUTION: DO NOT CUT HOLE LARGER THAN
FRAME PLATE OPENING.
Step 3: Sec
ure junction box to frame
plate.
Ceiling
Secure wire to prevent dam
age
while cutting hole
Us
e wire nuts to make connections.
Place splices in J-box before
closing cover.
Supply wire
Connector
Remove
k
nockout
SUPPLY
DRIVER
GROUND
LINE
COMMON
GREEN
B
LACK
WHITE