Dimmer Starter Kit Model DKIT-04SP Getting Started Simply Automated Pre-Configured SimplySmartTM Series Utilizes SimplySmartTM technology to make installation a breeze. No computer programming required! Simple-n-easy, ready to use lighting control.
Getting Started DKIT-04 Dimmer Starter Kit Simply Automated Pre-Configured SimplySmartTM Series Simple-n-easy, ready to use lighting control. No computer programming required! Utilizes SimplySmartTM technology to make installation a breeze. IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic safety precautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Installation should be performed by a qualified electrician.
Getting Started DKIT-04 Dimmer Starter Kit Section 2: Installation of the Dimmers and I/O Module Section 2.a. Installation of the Dimmers Locate two switches in your home (i.e. master bedroom, front door, garage entry, or outdoor porch) that turn on/off the lights you would like to control with your security panel and the I/O Module. Replace these switches with the Simply Automated Dimmers. To install the dimmers please refer to the User Guide in the boxes the dimmers came packaged in.
Getting Started DKIT-04 Dimmer Starter Kit Pre-Configured Input 1: Low voltage input. Turns on first dimmer (#16) when trigger is enabled. Turns off first dimmer when trigger is disabled. Used for delay entry/exit (lights on for entry, off for exit), arm/disarm acknowledgement, door strike or motion sensor interface. Installer needs to program security panel for each trigger interface.
Getting Started DKIT-04 Dimmer Starter Kit Section 3: Adding Additional Dimmers and Lamp Modules Simply Automated Pre-Configured SimplySmartTM Series offers simple-n-easy expansion capability. Add up to two additional dimmers or lamp modules to the Security Panel Dimmer Starter Kit.
Getting Started DKIT-04 Dimmer Starter Kit Section 4: Adding Lighting Control and Automation You can have even more lighting power with Simply Automated’s pre-configured lighting control kits and accessories. Fully compatible with the I/O Module and your security panel out of the box! Each accessory dimmer or lamp module added will automatically blink on/off when input 2 of the I/O Module is triggered by the security panel, will go on/off when input 3 is triggered.
Getting Started DKIT-04 Dimmer Starter Kit Section 5: Using the Pocket Programmer (sold separately) If you plan to do multiple installations, we highly recommend you purchase a Pocket Programmer (Model # UPP-20). The Pocket Programmer is a very powerful and simple tool for the dealer or installer. 1. Network ID. Each device in the pre-configured series has the same network ID (250).
Getting Started DKIT-04 Dimmer Starter Kit Section 7: Simply Automated Custom Expansion Series Powerful Custom Expansion Capability using your PC, Computer Interface Module (PN: UMCUSB) and UPStart software – up to 250 devices! Devices include single rocker dimmers, deluxe dimmers with different faceplates (up to 8 buttons), lamp or appliance modules, tabletop pedestal with 8 buttons, wall receptacle, fixture relay, fixture dimmer or scheduler-timer.
