SDS
_____________________________________________________________________________________________
1639470 - Rechargeable Li-Polymer Battery Pack -
AP20BHU
Revision Date 10-May-2021
(vacated) TWA: 15 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
Nickel
7440-02-0
TWA: 1.5 mg/m
3
TWA: 1 mg/m
3
(vacated) TWA: 1 mg/m
3
IDLH: 10 mg/m
3
TWA: 0.015 mg/m
3
Chemical name Alberta British Columbia Ontario TWAEV Quebec
Lithium Cobalt Oxide
(CoLiO2)
12190-79-3
TWA: 0.02 mg/m
3
TWA: 0.02 mg/m
3
TWA: 0.02 mg/m
3
TWA: 0.02 mg/m
3
Graphite
7782-42-5
TWA: 2 mg/m
3
TWA: 2 mg/m
3
TWA: 2 mg/m
3
TWA: 2 mg/m
3
Phosphate(1-),
hexafluoro-, lithium
21324-40-3
TWA: 2.5 mg/m
3
TWA: 2.5 mg/m
3
TWA: 2.5 mg/m
3
TWA: 2.5 mg/m
3
Copper
7440-50-8
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
TWA: 1 mg/m
3
TWA: 0.2 mg/m
3
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
Aluminum
7429-90-5
TWA: 10 mg/m
3
TWA: 1.0 mg/m
3
TWA: 1 mg/m
3
TWA: 10 mg/m
3
Nickel
7440-02-0
TWA: 1.5 mg/m
3
TWA: 0.05 mg/m
3
TWA: 1 mg/m
3
TWA: 1.5 mg/m
3
Other Exposure Guidelines
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962
(11th Cir., 1992). See section 15 for national exposure control parameters.
Appropriate engineering controls
Engineering controls
Showers
Eyewash stations
Ventilation systems.
Individual protection measures, such as personal protective equipment
Eye/face protection
Face protection shield.
Hand protection
Wear suitable gloves. Impervious gloves.
Skin and body protection
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron.
Respiratory protection
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
General hygiene considerations
Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do
not eat, drink or smoke when using this product. Remove and wash contaminated clothing
and gloves, including the inside, before re-use. Regular cleaning of equipment, work area
and clothing is recommended. Wash hands before breaks and immediately after handling
the product. Contaminated work clothing should not be allowed out of the workplace.
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state
Solid
Appearance
Solid
Odor
No data available
Color
No information available
_____________________________________________________________________________________________
Page 6 / 13