Installation Manual
SimpliPhi Power, Inc. | 420 Bryant Circle | Ojai, CA 93023, USA | +1 (805) 640-6700 | info@simpliphipower.com | SimpliPhiPower.com
| 11 |
Mounting Hardware
The SimpliPhi Power Mounting Brackets (sold separately) are designed to secure one PHI3.4™ Smart-Tech
Battery to a load bearing surface. SimpliPhi Power Smart-Tech Batteries can be mounted in practically
any orientation (Terminals Up, Down, On Side). The brackets can be mounted directly to a wall or
can be arranged on strut channels for ease of positioning. A qualified installer should be familiar with
accomplishing this with the appropriate load bearing requirements.
Mounting Bracket Hardware is also included: 1/4-20 x 5/8” Hex Washer Head Machine Screw - Slotted.
18-8 Stainless Steel
For ease of measuring, arranging and mounting your PHI Smart-Tech Battery array, a drawing of the
PHI3.4™ Mounting Brackets with dimensions is provided (page 12):
During mechanical testing, individual PHI3.4™ Mounting Brackets were exposed to 200 pounds each of
downward pressure along the bracket’s outer edge. During this test, a deflection of approximately 30
thousandths of an inch was measured. Combined bracket sets can easily bear weights in excess of 400
pounds. Bracket sets are designed to hold one PHI3.4™ Module, with a weight of 75.5 pounds.
PHI3.4™ Smart-Tech Battery Weight
PHI3.4™ Smart-Tech Batteries weigh 75.5 pounds. The Wall Mount Bracket Assemblies weigh 8 Pounds.
The SimpliPhi Power Mounting Brackets should be mounted into load bearing beams, studs or solid posts.
Check with your installer to select an appropriate wall space or surface.
PHI3.4™ Smart-Tech Battery Wall Mount + Bracket Dimensions
PHI3.4™ Battery
Width: 13,5’’
Height: 15.5’’ (including 1.5” terminal height)
Depth: 8”
Weight: 75.5 Pounds
PHI3.4™ Battery with Bracket
Width: 13.7”
Height: 15.5” (including 1.5” terminal height)
Depth: 9.16”
Weight: 83.5 pounds