Installation Manual: 22.8kWh

SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
| 34 |
Figure 16.0 - AccESS Cabinet Knockouts (Sides)
3. Strip 0.5” of insulation from the PV conductors, and insert into the appropriate charge controller port.
Figure 17.0 - PV Array Connection Points (DC Coupled Systems)
4. Ground the solar PV array by panel frame grounding to any ground connection in the home using 12
AWG wire. Solar PV mounting structures typically bond frames together, so only one ground wire is
needed.
REV20210319