Installation

REV073019
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
| 11 |
Conext ComBox easily connects with Conext Insight to enable you to remotely
monitor a portfolio of sites from any internet connected device like a laptop or a
tablet.
• Conext Automatic Generator Start
The Conext
TM
Automatic Generator Start (AGS) can automatically activate or stop a
generator in response to changing power requirements. An excellent addition to an
off-grid or backup power system, the AGS seamlessly connects to the Xanbus
TM
network and shares status information with all other devices on the network. It can
monitor a set of system user-programmable parameters such as battery voltage,
state of charge or grid power and can activate the generator in response to any
changes. The AGS can also be configured remotely using the Conext System Control
Panel (SCP) or Conext ComBox to engage a generator, and can assist an
inverter/charger when output power demands are high.
Note: Refer to Section 4.5.2 regarding the additional required “either-or” interlocked
switch for AC Coupled systems that include a generator.
• Cellular Modem
Allows remote monitoring of the system without utilizing a land-based internet
connection.