Installation

REV073019
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
| 20 |
Figure 7.0 - AC Power Input/Output Wiring Connection Points
Generator AC Wiring
For connecting a generator with the optional AGS from Schneider Electric, please refer to
Schneider Electric’s AGS Installation Manual.
CAUTION: On the Conext Mini PDP, an additional circuit breaker will need to be installed. The
Generator will connect through this circuit breaker and to the XW Pro or XW+ 6848 inverter.
CAUTION: In an AC Coupled system configuration, an “either-or” interlocked switch must be
installed between the generator output and the inverter’s AC2 (gen) input. Failure to install this
additional switch creates the potential for power to back feed from the grid-tie inverter to the
generator. Refer to Schneider Electric’s AC Coupling Application Note for more details.