SimpliPhi ESS Battery Installation Manual

|
8
|
REV202207071617
1.3.3 – Networking Communication Cables & Plugs
Each SimpliPHI battery comes with a 4’ CAT5 cable and a terminator plug for networking
communication set-up (explained in greater detail in Section 4.7 – Communications Wiring).
1.4 – Specifications
Please review the tables below for SimpliPHI 4.9 battery specifications.
Table 1.0 - SimpliPHI 4.9 Performance Specifications
DC Voltage - Nominal 51.2 VDC
DC Operating Voltage
Range
48 VDC to 56 VDC
Amp-Hours 97 Ah
Rated Capacity
4.9 kWh DC at 100% DoD
3.9 kWh DC @ 80% DoD
MAX Surge Discharge
Rate
(10 minutes)
100 Amps DC
(5.1 kW DC)
MAX Continuous
Discharge & Charge Rate
48.5 Amps DC
(2.5 kW DC)
DC Voltage Range
1
48 to 56 VDC
Depth of Discharge
1
up to 100%
Operating Efficiency 96%
Self-Discharge Rate < 1% per month (when off)
Memory Effect None
Cycle Life
10,000+ cycles (@ 80%
DoD)
Warranty Period 10 Years
Notes:
1
Max operating ranges. Refer to Warranty for
recommended conditions.
Table 1.1 - SimpliPHI 4.9 Mechanical Specifications
Dimensions (W x H x D)
23 x 28.5 x 8.5 in.
(30” H w/terminals) / 3.2 ft
3
(584 x 724 x 216 cm / 0.1 m
3
)
Weight 160 lbs. (73 kg)
Terminal Size 3/8” (10mm) threaded studs
Minimum Battery Cable
Size
4/0 (battery to battery)
2/0 (battery to inverter)
Table 1.2 - SimpliPHI 4.9 Installation Specifications
Maximum Battery
Quantity per System
72 batteries
(358.56 total kWh @ 100% DoD)
Comms Compatible
Inverters
SimpliPhi 6kW, Sol-Ark, SMA Sunny
Island
Mounting Wall Mount
Table 1.3 - SimpliPHI 4.9 Environmental Specifications
Charging Temperature 32° to 120° F (0° to 49° C)
Operating Temperature -4° to 140° F (-20° to 60° C)
Storage Temperature
6 months: 14° to 77° F (-10° to 25° C)
3 months: -4° to 113° F (-20° to 45° C)
Enclosure IP 65 with terminal covers