Samlex Integration Guide

REV070219
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
| 8 |
3.3 – MPPT Charge Controller Settings
Solar charge controllers must be used in DC coupled systems to regulate the power produced by the PV
array that is delivered to the batteries. Samlex does not offer charge controllers that are programmable to
SimpliPhi batteries’ charging parameters. Therefore, another manufacturer’s charge controller must be
used in conjunction with the PHI batteries instead.
4.0 – Specifications & Warranty
For your reference:
• See PHI 3.8 kWh, 2.9 kWh, 1.4 kWh, 730 Wh Specifications sheet.
• See PHI 3.8 kWh, 2.9 kWh, 1.4 kWh, 730 Wh Warranty; Failure to adhere to installation protocol
will void Warranty.
5.0 – SimpliPhi Technical Support
For technical support related to your PHI 3.8 kWh 48V Battery (or other SimpliPhi Power products),
please contact us directly at:
805.640.6700
[e-mail]