SMA Integration Guide

Table Of Contents

| 8 |

REV202109231540

> #224 Battery Silent Mode

The use of Battery Silent Mode is optional. Refer to Section 13.5.5 on page 114-115 of the Sunny Island

4548-6048-US Manual for more information on using Silent Mode.

> #225 Battery Current Sensor

The use of a battery current sensor is optional. Refer to Section 8.3 on page 73-74 of the Sunny Island

4548-6048-US Manual for more information on using a battery current sensor.

#233 Grid Start and #235 Generator Start parameters may be used in certain applications to control the

integration of these power sources according to the AmpliPHI battery bank’s State of Charge (SoC) level.

Notes:

• Levels are typical @ 25°C and may need adjusting at temperature extremes.

• Always refer to the SimpliPhi Power Manual and Warranty for the specific PHI battery model.

CAUTION: When AmpliPHI battery quantities change, the capacity & charge/discharge current settings should

automatically update but must be reverified. Failure to do so will Void the Warranty.

5. SPECIFICATIONS & WARRANTY

For your reference:

• See AmpliPHI 3.8 kWh-48V Specification sheet.

• See PHI Battery 10-Year Warranty; Failure to adhere to installation protocol will Void Warranty.

6. SIMPLIPHI TECHNICAL SUPPORT

For technical support related to your AmpliPHI Battery (or other SimpliPhi Power products), please