SimpliPhi Battery Manual

REV202010211307© SIMPLIPHI POWER, INC.
SIMPLIPHIPOWER.COM | 805-640-6700
21
Figure 9.0 - Interconnecting Busbar Placement on PHI Battery Threaded Stud
Helpful Tips:
• The interconnecting busbars’ ratings should match or exceed the PHI Battery bank’s total surge rating.
• Busbars for paralleling more than two or three PHI Batteries can be sourced from Storm Power Components: https://
stormpowercomponents.com/.
• SimpliPhi recommends paralleling PHI Batteries using interconnecting busbars (not battery cables) for PHI Battery Banks
consisting of more than 20 PHI Batteries for a cleaner installation.
• Size the battery cables leading from the interconnecting busbars to the Balance of System equipment using the National
Electrical Code’s Conductor Ampacity tables.
MISE EN GARDE: Ne pas inverser la polarité. Utiliser un voltmètre pour vérier la polarité avant de se
connecter aux bornes de la batterie. Inverser la polarité Annulera la Garantie.
MISE EN GARDE: Les Batteries PHI devraient être installées, câblées et mises en service par un installateur
agréé ou un électricien professionnel qui connaît les mesures de sécurité électriques générales et les
exigences particulières du code régional.
CAUTION: Do not reverse polarity. Use a voltmeter to check polarity before making connections to the
battery terminals. Reversing polarity will Void the Warranty.
CAUTION: PHI Batteries should be installed, wired and commissioned by a certied installer or professional
electrician who is familiar with general electrical safety precautions and specic regional code requirements.
4.7 – Battery System Commissioning