AmpliPHI Sol-Ark Integration Guide

SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
|
14
|
© SIMPLIPHI POWER
CAUTION: WHILE SOL-ARK SETTINGS MUST BE ADJUSTED WITH ANY CHANGE IN
THE PAIRED QUANTITY OF STANDARD (NON-COMMUNICATIONS) PHI BATTERIES,
AN INCREASE OR DECREASE IN THE NUMBER OF AMPLIPHI BATTERIES IN A BANK
RESULTS IN AUTOMATICALLY ADJUSTED CAPACITY AND CHARGE/DISCHARGE
CURRENT SETTINGS IN THE SOL-ARK EQUIPMENT. SIMPLIPHI ASKS THAT YOU CHECK
THE ADJUSTED PARAMETERS’ VALUES HAVE AUTOMATICALLY UPDATED
CORRECTLY.
4.3 – Grid Setup
The Sol-Ark’s Grid Setup menu includes many advanced features (refer to Section 5 of this Guide). Regardless
of the features used, the AmpliPHI battery bank should never discharge more than its maximum continuous
discharge rate. Furthermore, to maintain the AmpliPHI batteries’ optimal (10,000-cycle level) life, also do not
discharge the battery bank to a State of Charge (SoC) level less than 20%. These details are controlled in the
Grid Setup menu’s Limiter tab. (Figure 9)
F
igure 9: Limiter Tab in Grid Setup menu
REV202105181844