AmpliPHI 3.8kWh Battery Installation Manual
Table Of Contents
- 1.0 – Introduction
- 1.1 – Online Resources
- 2.0 –Safety
- 3.0 – Pre-Installation
- 4.0 – Installation
- 5.0 – Programming
- 6.0 – Troubleshooting
- Appendix A – AmpliPHI Battery Safety & Green Attributes, Certifications
- Appendix B – AmpliPHI Approved External Chargers
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 | info@simpliphipower.com | SimpliPhiPower.com
| 18 |
© SI
MPLIPHI POWER
Figure 8.0 – AmpliPHI Wiring using Interconnecting Busbars
CAUTION: Again, no material (such as a washer) should be placed between the current
carrying terminal and the interconnecting busbars. The interconnecting busbars are placed
on the AmpliPHI Batteries’ terminals first, then the flat washer, lock washer, and nut are
secured to the terminal posts.
Figure 9.0 – Interconnecting Busbar Wiring onto AmpliPHI Threaded Stud
REV202203161200