AmpliPHI 3.8kWh Battery Installation Manual

SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
| 12 |
© SIMPLIPHI POWER
4.4 – Dimensions and Weight
Table 2.0 – Specifications: AmpliPHI 3.8 Battery w/ Mounting Bracket
PHI 3.8 Battery
PHI 3.8 Battery
w/ Mounting Bracket
Width
13.5’’
13.7” (18” with mounting flanges)
Height 15.5’’ (including 1.5” terminal height) 15.75” (including 1.5” terminal height)
Depth 8” 9”
Weight 78.2 Pounds 86.2 pounds
Figure 2.0 – PHI 3.8 Mounting Bracket Assembly
4.5 – AmpliPHI Battery Connection Terminals
4.5.1 – Batteries with Threaded Studs
The AmpliPHI Battery is equipped with two 3/8’’ (10 mm) threaded studs with a lock washer and nut.
The red colored high temperature molded insert connection is for the positive lead. The black colored
high temperature insert connection is for the negative lead.
Water resistant cable boots are also included and will be in place when your units arrive. The boots are
to be placed over the cable terminations and will stretch to form a water-resistant seal around the base
of the molded inserts and terminal connections.
AmpliPHI 3.8 Battery
WITH WALL MOUNT BRACKET
REV202203161200