AmpliPHI Sol-Ark Integration Guide

SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | [phone] | [e-mail] | SimpliPhiPower.com
|
22
|
© SIMPLIPHI POWER
Power Technical Support ([e-mail]) if the Smart Load feature will be used and
battery bank sizing clarification according to Smart Load-specific loads needs to be clarified.
Note that in a grid-connected system that utilizes the Smart Load feature, the Wattage value to the right of the
Smart Load ON Batt parameter in the Smart Load
menu tab (see Figure 5) represents the minimum power
required of the solar PV array before the Smart Loads are powered. Therefore, that Solar PV Wattage value
can be added to the battery bank’s maximum output power rating when comparing maximum available solar
and battery power available, against the Smart Load power draw:
  
(

)
≤  
(

)
+      ()
CAUTION: SMART LOADS’ MAXIMUM POWER DRAW CANNOT EXCEED THE
GENERATOR INPUT BREAKER’S 40 AMP / 240VAC RATING.
6.0 – Specifications & Warranty
For your reference:
• See AmpliPHI 3.8 Specifications Sheet.
• See PHI Battery 10 Year Limited Warranty
Failure to adhere to installation protocol will void the Warranty.
7.0 – SimpliPhi Power Technical Support
For technical support related to your PHI Battery (or other SimpliPhi Power products), please contact us
directly at:
805.
640.6700
[e-mail]
REV202105181844