Owner’s Manual Installation and Operation Model(s): SF-BI30-E, SF-BI36-E NOTICE DO NOT DISCARD THIS MANUAL • Important operating and maintenance instructions included. • Read, understand and follow these instructions for safe installation and operation. • Leave this manual with party responsible for use and operation. D DI O N SC OT AR D READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THIS PRODUCT. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION.
1 Important Instructions important safety instructions WARNING! Risk of Fire! Risk of Burns! Risk of Electrical Shock! DO NOT: • • • Install or operate damaged heater Modify heater Operate the heater without fully assembling all components The following actions are strictly prohibited. • Installation other than as instructed by Hearth & Home Technologies Inc. • Installation and/or use of any component part not approved by Hearth & Home Technologies Inc. Hearth & Home Technologies Inc.
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. B. Congratulations Congratulations on selecting a SimpliFire Electric Fireplace, an elegant and clean alternative to wood & gas burning fireplaces. The SimpliFire electric fireplace you have selected is designed to provide the utmost in safety, reliability, and efficiency.
Safety Alert Key: • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Table of Contents 1 Important Instructions A. Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 B. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 C. Limited Lifetime Warranty. . . . . . . . . . . . . . .
C. Limited Lifetime Warranty Hearth & Home Technologies LIMITED LIFETIME WARRANTY Hearth & Home Technologies, on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer.
B. Limited Lifetime Warranty (continued) This warranty is void if: • • • The appliance is operated in atmospheres contaminated by chlorine, fluorine, or other damaging chemicals. The appliance is subjected to prolonged periods of dampness or condensation. There is any damage to the appliance or other components due to water or weather damage.
2 General Information A. Appliance Certification B. Unpacking and Inspecting Appliance MODELS: SF-BI30-E, SF-BI36-E WARNING! DO NOT use this Electric Fireplace if any part has been under water. Immediately call a qualified service technician to inspect and to replace any part of the electrical system if necessary. Keep plastic wrapping away from children.
3 Getting Started A. Parts and Hardware B. Tools and Supplies Needed Before beginning the installation be sure that the following tools and building supplies are available. Tape measure Pliers Hammer Gloves Magnetic Phillips screwdriver Safety glasses Flat blade screwdriver Parts and Hardware List Part Quantity Fireplace 1 Instruction Manual 1 Remote Control 1 AAA Battery 2 Mounting Bracket 4 Screw ST4x8 8 Screw ST4x12 8 C. Appliance Dimensions 3/4 in. 3-1/2 in. H1 H2 H3 2-3/8 in.
D. Location F. Electrical Supply Circuit Requirements • For best results, install out of direct sunlight. • Power supply service must be installed within proximity of electric fireplace prior to finishing to avoid reconstruction. Plan the location of the appliance so that it will have adequate electric power. A 15 AMP, 120V/60hz. circuit is required. Additional appliances on the same circuit as this heater may exceed the current rating of that circuit.
4 installation A. Selecting Appliance Location This product can be built into new construction or an existing factory-built fireplace. Reference Sections 4.A - 4.D for specific information for your installation. When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 4.1). WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access.
B. Installation into Existing Fireplace 1. Seal all drafts with non-fiberous insulation materials to prevent debris or water from falling from the chimney to electric fireplace. 2. Close or seal off the chimney flue and close damper (if applicable) to prevent rain infiltration. 3. Do not install in an existing fireplace that is prone to dampness. 4. A provision must be made for the appliance to be connected to power within existing firebox, or on an adjacent wall. C.
5 operating instructions WARNING! Do not operate the unit if it is damaged or has malfunctioned. If you suspect the unit is damaged, call a qualified service technician to inspect and replace any part of the electrical system if necessary. Note: A harmless slight brief odor may occur during first use or after prolonged period of storage. Heater Button - Press the heater button once to turn 750W power on. Appliance will beep and illuminate 1 red LED. - Press again turns 1500W power on.
B. Operating by Remote Control C. Resetting Temperature Cutoff Switch • Make sure batteries are properly installed in Remote Control. - Battery requirements 2 x AAA batteries (included) • The effective range of the remote is up to 13 ft. The heater is protected with a safety device to prevent overheating. Should the heater overheat, an automatic cutoff will turn the heater OFF. It will not turn ON automatically without being reset.
6 maintenance A. Maintenance B. Cleaning WARNING! Risk of Shock! Always unplug the cord before moving or servicing. Do not immerse heater in water. Cleaning Glass • Always turn OFF the heater and disconnect the cord from the electrical outlet before cleaning your heater. • Light accumulated dust may be removed from the heater with a soft cloth or vacuum cleaner. • Wipe the exterior surfaces of the heater occasionally with a slightly damp cloth using a solution of mild detergent and water.
SF-BI30-E E. Service Parts List Service Parts Beginning Manufacturing Date: Feb 2013 Ending Manufacturing Date: Active 30” Electric Fireplace #3 LED Strips #2 Rotisserie Motor #1 Heater Tray #4 Log/Grate Assembly #7 Front #6 Flame Screen #5 Refractory Kit #8 Glass #9 Remote IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.
SF-BI36-E Service Parts Beginning Manufacturing Date: Feb 2013 Ending Manufacturing Date: Active 36” Electric Fireplace #2 Rotisserie Motor #1 Heater Tray #4 Log/Grate Assembly #7 Front #3 LED Strips #6 Flame Screen #5 Refractory Kit #9 Remote #8 Glass IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.
F. Replacement Instructions Log/Grate Replacement WARNING! Risk of Shock! Always disconnect power before disassembly or servicing. 1. If necessary, place a drop cloth or other material on the hearth or flooring to prevent scratching. Grasp front with two hands. Pull straight back to disengage front from appliance. Front Replacement 1. If necessary, place a drop cloth or other material on the hearth or flooring to prevent scratching. Grasp front with two hands.
Flame Screen Replacement 1. If necessary, place a drop cloth or other material on the hearth or flooring to prevent scratching. Grasp front with two hands. Pull straight back to disengage front from appliance. 2. Locate C-channel that retains top edge of glass panel. While supporting the glass, remove the screw located in the C-channel at the top two corners of the glass panel. See Figure 6.2. 3. Pivot glass away from appliance and lift out of bottom retainer channel. 4.
Refractory Replacement 1. If necessary, place a drop cloth or other material on the hearth or flooring to prevent scratching. Grasp front with two hands. Pull straight back to disengage front from appliance. 2. Locate C-channel that retains top edge of glass panel. While supporting the glass, remove the screw located in the C-channel at the top two corners of the glass panel. See Figure 6.2. 3. Pivot glass away from appliance and lift out of bottom retainer channel. 4.
Lighting LED Replacement Note: Kit includes all three LED light strip assembly. 1. If necessary, place a drop cloth or other material on the hearth or flooring to prevent scratching. Grasp front with two hands. Pull straight back to disengage front from appliance. 2. Locate C-channel that retains top edge of glass panel. While supporting the glass, remove the screw located in the C-channel at the top two corners of the glass panel. See Figure 6.2. 3.
Blower/Heating Module Replacement 1. If necessary, place a drop cloth or other material on the hearth or flooring to prevent scratching. Grasp front with two hands. Pull straight back to disengage front from appliance. 2. Locate C-channel that retains top edge of glass panel. While supporting the glass, remove the screw located in the C-channel at the top two corners of the glass panel. See Figure 6.2 3. Pivot glass away from appliance and lift out of bottom retainer channel. 4.
17. Remove three screws that attach motor mount bracket to the appliance chassis. See Figure 6.17. 34. Install and tighten the screw in each end of the grate. See Figure 6.3. 18. Remove the motor and bracket from the chassis until the electrical connector is visible. See Figure 6.18. 35. Install rubber plugs into holes in each end of grate. See Figure 6.3. 19. Disconnect the electrical connector to the motor. See Figure 6.18. 36. Install glass into bottom retainer channel. 20.
Figure 6.3 Grate and Log Screw Location Figure 6.6 Barbed Clip Access during LED Circuit Board Replacement Figure 6.4 Light LED Connection on Bottom of Log Ember Bed Figure 6.7 Light LED Circuit Power Source Connectors Figure 6.5 Removal and installation of LED access panel Figure 6.8 Four Thumb Screws located in Upper Rear of Appliance Cavity SimpliFire • SF-BI30-E, SF-BI36-E • 2040-900 Rev.
Figure 6.9 Four Screws that attach Blower/Heater Module to Upper Face of Appliance Figure 6.12 Alignment of Tabs in Rear Edge of Refractory with Slots in Appliance 5 4 3 2 1 Figure 6.10 Five Electrical Connections required for Heater/ Blower Module Removal and Installation Note: Orientate so notch is isolated on lower right corner. Figure 6.13 Location of one screw that retain Brick Panel to Rear Wall of Appliance Front Edge Retainer Tabs Figure 6.
Figure 6.15 Removal and Installation of Reflector Rod Coupler to Motor Shaft Figure 6.16 Removal and installation of faux flame access panel. Figure 6.17 Location of three Screws that attach Motor Mount Bracket to Appliance Figure 6.18 Electrical Connection required for replacement for the Faux Flame Motor. SimpliFire • SF-BI30-E, SF-BI36-E • 2040-900 Rev.
G. Contact Information SimpliFire, a brand of Hearth & Home Technologies Inc. 7571 215th Street West, Lakeville, MN 55044 www.hearthnhome.com Please contact your SimpliFire dealer with any questions or concerns. For the location of your nearest SimpliFire dealer, please visit www.hearthnhome.com.
