SW4:1 4×1 4K@60 HDMI Switch User manual
Thank you for purchasing this device The Simplified MFG SW4:1 is designed to provide years of reliable service. At Simplified MFG, we want the experience with this device to be the best possible and are committed to helping achieve that experience. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
I. Introduction The SW4:1 a high-performance HDMI 4x1 switch that supports HDTV formats up to 4Kx2K@60Hz and all HDMI 3D TV formats. It can extract HDMI stream audio to separate digital and analog audio output. This product supports HDCP repeater/CEC/ARC functions. Select any of the inputs by front panel button or IR Remote, the corresponding indicator LED on the front panel will be illuminated. II. Features • Compliant with HDMI 2.0a, DVI 1.0 standards • HDCP 2.2 and HDCP 1.
• Digital and analog audio output • Supports smart EDID management (Auto/2CH/5.1CH/7.1CH selectable) • Supports input port auto switching or manual switching mode • Audio Return Channel (ARC) support III.
IV. Specifications Frequency Bandwidth 18Gbps Input Ports 4 HDMI Female ports, 1 IR Receive port and 1 RS232 port Output port 1 HDMI Female port and 1 L/R & Optical port HDMI Audio Output PCM2.1/5.1/7.1CH, Dolby5.1,DTS5.1, Dolby-TrueHD, DTS-HD ESD Protection Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions (mm) 180 (D) x 85 (W) x 11.6 (H) Weight (g) 300 Power Consumption Max 2.
V. Switch Operation controls and Functions Front Panel: ① Input indicator LED, corresponding port LED will be illuminated when its port is selected. ② Auto or manual select button: Press this button >2 seconds to select auto switching or manual switching mode. Under manual switching mode, short pressing this button to select input port. ③ EDID status LED (Auto means the EDID of the display is being utilized). ④ EDID select button (Press this button to select EDID mode Auto/2.1CH/5.1CH/7.
⑤ ARC status LED (this LED will be illuminated if ARC is enabled successfully) ⑥ ARC function on/off button Rear Panel: ① HDMI output port, connect to display via HDMI cable ②③④⑤ HDMI input ports, connect with HDMI source via HDMI cable ⑥ Audio output (including L/R analog and optical audio out) ⑦ RS232 port ⑧ IR receiver port ⑨ DC 5V input port 6
VI. IR Remote ARC: Press this button to enable or disable ARC function. ARC LED on front panel will be illuminated if ARC function is enabled successfully. Auto/2.1ch/5.1ch/7.1ch: Press these buttons to select different EDID setting and corresponding LED on front panel will be illuminated. Auto Source: Press this button to select auto switching or manual switching mode. In1/In2/In3/In4: Under manual switching mode, press this button to select input.
VII.
Warranty Should you feel your product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of purchase) either: a) Repair the product with new or refurbished parts. or b) Replace it with a new or refurbished product. All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty.
1. This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage.
warranty. For example: damages for lost time, the cost of having a person/persons remove or re-install previously installed equipment, travel to and from service location, loss of or damage to media, images, data or other recorded/stored content. The items listed here are not exclusive, but are for illustration only. Parts and service not covered by this limited warranty are not the responsibility of the warrantor and should be considered the responsibility of the individual.
BY THE APPLICATION OF THIS INFORMATION, WHETHER EXPECTED OR NOT. Simplified MFG reserves the right to change software, control codes and specifications without notice. Simplified MFG will not be liable for any use of this information or any changes it may make to those products. The use of this information constitutes an agreement by the user to these limitations and exclusions. Contact Sales and Tech Support P 1-833-HDMI-411 E info@simplifiedmfg.
How to extract audio from HDMI 1. Audio Extraction with no conversion. AUDEX1 extracts the audio in the format sent up to 5.1 HDMI Cable or Extender Stereo or up to 5.1 Audio AUDEX1 HDMI Optical or Stereo 2. Audio Extraction with down conversion. DAC1 extracts the audio from any format and down converts it to stereo Sound Bar HDMI Cable or Extender with any audio format DAC1 HDMI Optical or Stereo Sound Bar 3.
