Owner's Manual

7
7
Numb
er
Name
Function description
1
POWER
LED
This blue LED will illuminate when the unit
has connected power supply.
2 HDMI
INPUT LED
This blue LED will illuminate when the
HDMI IN has connected an active HDMI
source device with a HDMI cable.
3
HDMI
OUTPUT
LED
These blue LEDs will illuminate when the
HDMI OUT port has connected an avtice
display device with a HDMI cable.
4
SERVICE
port
Firmware update use. (Manufacturer use
only.)
5
EDID
AUTO: Compares OUT 1 through 4
displays EDID settings, then selects the
lowest common resolution of the four. The
source will transmit the signal again to all
outputs.
COPY: Copies the HDMI OUT 1 port EDID
setting. The source device will transmit
again the signal to all outputs.
6
DIP switch
(4K→1080
P)
OFF: When the DIP switch is in ‘OFF’
position, signal input and output is bypass
status.
ON: When the DIP switch is in ‘ON’
position, the signal input will