SP1:8 UHD 1x8 HDMI Splitter User manual
Thank you for purchasing this device The Simplified MFG SP1:8 is designed to provide years of reliable service. At Simplified MFG, we want the experience with this device to be the best possible and are committed to helping achieve that experience. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
receiving and transmitting up to 18Gbps of bandwidth with no data loss. Supporting the latest features of the most advanced HDMI 2.0b signals. II. Features 1. HDMI2.0, HDCP2.2 and DVI 1.0 Compliant 2. Support video format up to 4k2k@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2,and up to 4k2k@60Hz with 12bit YCBCR 4:4:4; 3. Support high resolution VESA mode video format up to QSXGA@60Hz; 4. Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio; 5. Supports smart EDID control; III. Package 1.
IV. Specifications 1. Video Bandwidth 600MHz/18Gbps 2. Input Ports 1 × HDMI (Female type) 3. Output Ports 8 × HDMI (Female type), 4. Output Resolution 480i ~1080p50/60, 4Kx2K@24/30, 4k2k@60Hz 5. ESD Protection Human Body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge) 6. Power Supply 12V/2.5A DC (US/EU standards, CE/FCC/UL certified) 7. Dimensions 105 mm (W) × 245 mm (D) × 16 mm (H) 8. Weight 630g 9. Chassis Material Metal 10.
12. Relative Humidity 13. Power Consumption (Max) 20~90 % RH (non-condensing) 30W V. Operation controls and Functions Front Panel & Rear Panel 1. POWER LED: This blue LED illuminates when the device is connected with power supply.
2. OUT LED: These blue LEDs will light up to indicate which HDMI outputs are connected to an active TV/display/monitor. 3. IN LED: This blue LED illuminates when the Source connected to the device. 4. SERVICE: Manufacturer use only. 5. EDID STD: When in 'STD' mode, the unit will use its own built-in EDID settings. In this mode, the video output will be set to 1080p@60Hz and the audio output at LPCM 2CH Stereo. Use this mode if there are display problems in TV Mode. 6.
distance. 8. HDMI IN: Connect the input port to the HDMI or DVI output of your source device such as a DVD player or set-top box with an HDMI cable. 9. DC 12V: Plug the 12V DC power supply into the unit and connected the adaptor to an AC outlet. VI.
Warranty Should you feel your product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of purchase) either: a) Repair the product with new or refurbished parts. or b) Replace it with a new or refurbished product. All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty.
1. This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage.
resulting from the use of this product or arising out of any breach of this warranty. For example: damages for lost time, the cost of having a person/persons remove or re-install previously installed equipment, travel to and from service location, loss of or damage to media, images, data or other recorded/stored content. The items listed here are not exclusive, but are for illustration only.
Simplified MFG Publication Disclaimer The material contained in this document consists of information that is the sole property of Simplified MFG. This document is intended to provide information to allow interfacing to the relevant Simplified MFG equipment by third party products. Simplified MFG IS NOT RESPONSIBLE FOR MALFUNCTIONS AND/OR THE IN-OPERABILITY WHICH MAY BE CAUSED BY THE APPLICATION OF THIS INFORMATION, WHETHER EXPECTED OR NOT.
Contact Sales and Tech Support P 1-833-HDMI-411 E info@simplifiedmfg.
SP1:8 Quick Start Guide HDMI HDMI HDMI HDMI HDMI HDMI HDMI HDMI HDMI • • The SP1:8 is a HDMI 2.0b (18Gbps) 4K splitter that takes one input and splits it to 8 outputs The SP1:8 copies the EDID of output 1 and shows the source that EDID, unless the “Std” switch is engaged and then it shows a 1080p EDID to the Source HDMI Source Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.
SP1:8 HDMI 2.0b (18Gbps) 1:8 Splitter Specifications: Technical The SP1:8 is a HDMI 2.0b (18Gbps) HDMI splitter device. The SP1:8 has 1 HDMI Input and 8 HDMI Outputs. The EDID is preset to copy the EDID of OUTPUT 1. By switching displays on the outputs, EDID shown to the source can be manipulated. There is an EDID switch that overrides the display’s request and is set to 1080p Features: • Supports the entire HDMI 2.0b format HDMI Compliance HDCP Compliance HDMI 2.
