RSP1:2 UHD 1x2 HDMI Splitter
User manual Thank you for purchasing this device The Simplified MFG RSP1:2 is designed to provide years of reliable service. At Simplified MFG, we want the experience with this device to be the best possible and are committed to helping achieve that experience. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
Introduction The RSP1:2 is 1 by 2 HDMI 18gbps UHD Splitter with HDCP 2.2 is an advanced solution for splitting a single HDMI input to two HDMI outputs. It provides high performance audio and video output through HDMI cables up to 4K2K@60Hz (YUV444) resolution and is capable of receiving and transmitting up to 18Gbps of bandwidth with no data loss. Supporting the latest features of the most advanced HDMI 2.0b signals II. Features 1. Compliant with HDMI2.0, HDCP2.2 and DVI 1.0; 2.
5. Supports smart EDID control; III. Contents 1. UHD 1x2 HDMI Splitter ------------------------------------------------------------------ 1PC 2. 5V1A DC Power adapter ----------------------------------------------------------------- 1PC 3. Operation Manual ------------------------------------------------------------------------- 1PC IV. Specifications 1. Video Bandwidth 600MHz/18Gbps 2. Input Ports 1 × HDMI (Female type) 3. Output Ports 2 × HDMI (Female type), 4.
9. Dimensions 56 mm (W) × 100 mm (D) × 16 mm (H) 10. Weight 165 g 11. Chassis Material Metal 12. Operating Temperature 0 °C~40 °C/ 32 °F~104 °F 13. Storage Temperature −20 °C ~ 60 °C/−4 °F ~140 °F 14. Relative Humidity 20~90 % RH (non-condensing) 15. Power Consumption (Max) 5W V.
1. POWER LED: This red LED illuminate when the device is connected to power supply. 2. OUT LED: These blue LEDs will light up to indicate which HDMI outputs are connected to an active TV/display/monitor. 3. IN LED: This blue LED illuminate when the Source connected to the device.
4. EDID STD: When in 'STD' mode, the unit will use its own built-in EDID settings. In this mode, the video output will be set to 1080p@60Hz and the audio output at LPCM 2CH Stereo. Use this mode if there are display problems in TV Mode. 5. EDID TV: When in 'TV' mode, the unit will read the EDID settings of the display device connected to HDMI OUT 1. If it detects a 4K2K capable EDID setting it will transmit the signal in that format to all outputs.
outlet. VI.
Warranty Should you feel your product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of purchase) either: a) Repair the product with new or refurbished parts. or b) Replace it with a new or refurbished product. All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty.
subsequent owners, even during the warranty period. A purchase receipt or other proof of original purchase date is required for the limited warranty service. 1. This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage.
2. There are no express warranties except as listed under “limited warranty coverage.” The warrantor is not liable for incidental or consequential damage resulting from the use of this product or arising out of any breach of this warranty. For example: damages for lost time, the cost of having a person/persons remove or re-install previously installed equipment, travel to and from service location, loss of or damage to media, images, data or other recorded/stored content.
Simplified MFG Publication Disclaimer The material contained in this document consists of information that is the sole property of Simplified MFG. This document is intended to provide information to allow interfacing to the relevant Simplified MFG equipment by third party products. Simplified MFG IS NOT RESPONSIBLE FOR MALFUNCTIONS AND/OR THE IN-OPERABILITY WHICH MAY BE CAUSED BY THE APPLICATION OF THIS INFORMATION, WHETHER EXPECTED OR NOT.
Contact Sales and Tech Support P 1-833-HDMI-411 E info@simplifiedmfg.
RSP1:2 Quick Start Guide HDMI 4K Display HDMI HDMI 4K Display • • HDMI Source • The RSP1:2 is a HDMI 2.0b (18Gbps) 4K splitter that takes one input and splits it to two outputs.
RSP1:2 HDMI 2.0b (18Gbps) 1:2 Splitter Specifications: Technical The RSP1:2 is a HDMI 2.0b (18Gbps) HDMI splitter device. The RSP1:2 has 1 HDMI Input and 2 HDMI Outputs. The EDID is preset to copy the EDID of OUTPUT 1. By switching displays on the outputs, EDID shown to the source can be manipulated. There is an EDID switch that overrides the display’s request and is set to 1080p Features: • Supports the entire HDMI 2.
