RPS1 4K 5x1 Multi-format Scaler Switcher Thank you for purchasing this device The Simplified MFG EX1 is designed to provide years of reliable service. At Simplified MFG, we want the experience with this device to be the best possible and are committed to helping achieve that experience. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
Table of Contents 1. Introduction ................................................................. 2 2. Features........................................................................ 2 3. Package Contents ......................................................... 3 4. Specifications ............................................................... 4 5. Operation Controls and Functions ................................ 5 6. Connection Diagram ................................................... 13 1.
2. Features • Compliant with HDMI2.0/1.4b, HDCP2.2/1.4 • Supports multi inputs: 4 x HDMI, 1 x VGA ( YPbPr, CVBS) • Supports HDMI input resolutions up to 4K UHD 4:4:4 @50/60 • Supports output resolutions up to 4K UHD 4:4:4 @60 • Two input switching modes: auto or manual • User assignable EDID • PCM 2CH audio pass through • Device could be controlled via touch panel button, IR remote and RS-232 • Supports USB online software upgrading 3.
. Specifications Technical HDMI Compliance HDMI 2.0/1.4b HDCP Compliance HDCP 2.2/1.4 HDMI: up to 4K2K@50/60Hz(4:4:4) C-Video: PAL/NTSC3.58/NTSC4.43/SECAM/PAL M/PAL N Video Input Resolutions YPBPR: 480i to1080p VGA: 640x480 to1920x1200 HDMI Output Resolutions • 4K2K60,4K2K30,1920X1080p/50, 1920X1080p/60, • 1280X720p/50, 1280X720p/60 1024x768/60,1280x800/60, • 1360x768/60,1400x1050/60,1680x1050/60,1920x1200/60; Audio Formats LPCM 2.
Power Consumption 9W(max) Operation Temperature 32 - 104°F / 0 - 40°C Storage temperature -4 - 140°F / -20 - 60°C Relative Humidity 20 - 90% RH (no condensation) 5. Operation Controls and Functions 5.1 Front Panel Power button and indicator: Switches between standby and work mode. When this device is switched to the standby mode, the indicator turns red.
5.2 Rear Panel Output: HDMI output for connecting to an HDMI display or other HDMI device L/R stereo audio output to the analog audio input port of your amplifier Input: The input ports include 4 HDMI & 1 VGA input ports. The VGA ports supports YPbPr, C-video and VGA input formats.
5.3 OSD MENU The RPS1 provides a powerful OSD operation menu. Press MENU button on IR remote to enter in OSD menu, Users can then change settings through the OSD menu. 5.3.1 Main MENU The Main MENU includes Picture, Aspect ratio, Screen, EDID, and Software update options. 5.3.2 Picture The user can adjust picture contrast(default:50), brightness(default:50), color(default:30), sharpness (default:10) etc.
5.3.3. Aspect Ratio The user can adjust picture output aspect ratio to 4:3 or 16:9 . 5.3.4 Screen The screen MENU is an adjustment for VGA input only. The user can adjust horizontal, vertical position, size and phase.
5.3.5 EDID The EDID adjust MENU for HDMI input only. EDID1.4 for HDMI1.4 standard. EDID2.0 for HDMI2.0 Standard, and EDID AUTO for copy the display EDID Mode. 5.3.6 Software update The RPS1 supports software updates via USB flash disk. The procedure is as follows: 1) Copy the file “MERGE.bin” to the root directory of a USB flash disk. (Make sure the file is copied to the root directory. The “MERGE.
5.3.7 Resolution The RPS1’s HDMI output can be set to multiple different resolutions. Press the “RES” button on the IR remote, the resolution menu will display. The user can select suitable resolution for HDTV or monitor. Auto means that the HDMI resolutions based on the EDID information read from the display device. 5.4 Remote Control ① Press this button to power on the scaler switcher or set it to standby mode. ② Press this button for mute or unmute the audio output.
OK: confirm button. UP/DWON/LEFT/RIGHT button: for OSD value setting. ⑦ VOL-/+ decrease or increase audio volume, MIC-/+ is Unused. 5.5 Auto-Switching function The RPS1 has an auto-switching mode and manual-switching mode. When the user selects auto-switching mode, it will react as follows: 5.5.1. New input principle Once a new input signal is detected, the RPS1 will switch to this new signal automatically. 5.5.2.
5.7 Operations of RS232 Control Please connect the RPS1 with input devices and output device needed, then connect it with a computer that is installed with RS232 control software. Double-click the software icon to run this software on your computer.
6. Connection Diagram Computer or Third-party Control System 1. Connect HDMI source devices (e.g. Blu-ray DVD) to HDMI input ports of the RPS1 with HDMI cable. Connect VGA source device (eg. PC/note-book) to VGA input ports of the scaler switcher with a VGA cable. 2. Connect HDMI display device to the HDMI output port of the RPS1 with a HDMI cable. 3. Connect speaker, headphone or specialized amplifier to AUDIO output port of the RPS1. 4. Connect control device (e.g. PC) to RS232 port of the RPS1. 5.
Warranty Should you feel your product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated below (starting from the original date of purchase) either: a) Repair the product with new or refurbished parts. or b) Replace it with a new or refurbished product. All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty.
Simplified MFG Publication Disclaimer The material contained in this document consists of information that is the sole property of Simplified MFG. This document is intended to provide information to allow interfacing to the relevant Simplified MFG equipment by third party products. Simplified MFG IS NOT RESPONSIBLE FOR MALFUNCTIONS AND/OR THE IN-OPERABILITY WHICH MAY BE CAUSED BY THE APPLICATION OF THIS INFORMATION, WHETHER EXPECTED OR NOT.
RPS1 Quick Start Guide Nearly Any Resolution Display HDMI Sound Bar VGA or Component Optical EX1L shown RS232 HDMI Cat6/6A/7/8 RS232 HDMI HDMI • HDMI HDMI Stereo RS232 Legend ̶ ̶ ̶ ̶ ̶ ̶ ̶ HDMI ̶ ̶ ̶ ̶ ̶ ̶ AV Cat ̶ ̶ ̶ ̶ ̶ ̶ Network ̶ ̶ ̶ ̶ ̶ ̶ Audio Line ̶ ̶ ̶ ̶ ̶ ̶ Speaker ̶ ̶ ̶ ̶ ̶ ̶ Ir TX ̶ ̶ ̶ ̶ ̶ ̶ Ir RX ̶ ̶ ̶ ̶ ̶ ̶ RS232 HDMI Source HDMI Source Amp HDMI Source HDMI Source Control System • • • The RPS1 is a five input scaling presentation switch (4 HDMI, 1 Combo VGA/Component) The
RPS1 HDMI 2.0b (18Gbps) 5 Input Presentation Switch Specifications: Technical The RPS1 is a 5 input presentation switch (4HDMI/1 VGA/Component). The front panel is capacitive touch and can be used to switch inputs as well as auto switching, IR, and RS232 controllable. This device will accept nearly any resolution input and can scale to nearly any resolution out including frame rate conversion (30Hz./60Hz. Output at 4K). Other features include picture control and an HDMI/3.