Owner's Manual

10
• The Power on button changes the power status of the matrix
between On and Stand-by mode.
■ Video page
The Video page allows selection of the inputs source and set the presets.
To this preset setting, first you need to select the desired input source to four
output ports. Then click the Save button to save the setting. When you click
the line Set button, this preset you have saved will be used. The Clear button
will clear the preset. There are four presets setting available.
■ Input page
The Input page provides information about which inputs are connected and
have a signal present. The inputs can be giving more meaningful names, if
desired. The EDID column provides a list of EDID options for each individual
input.