Owner's Manual

4/9
5. Operation Controls and Functions
5.1 Transmitter Panel
No.
Name
Function Description
1
HDMI IN
HDMI signal input port. Connect to HDMI
source device.
2
EDID
Switch
The switch is used for selecting EDID: Switch
to the right position, the extender will copy
HDMI loop out display EDID information to
signal source. Switch to the left position, the
extender will copy Receiver display EDID
to signal source.
3
HDMI OUT
HDMI signal loop out port. Connect to HDMI
display device such as HDTV.
4 IR OUT
Connect to IR blaster cable, the IR signal is
from the IR IN port of the receiver.
5 Power LED
When the transmitter is powered on, the LED
will be Illuminated.
6
CAT
CAT output port. Connect to the CAT input
port of the receiver with CAT5E/6 cable.
IR OUT DC 5V
HDMI OUTEDID
HDMI IN
CAT